Gigabyte BRIX - Save & Exit

■
■
■
■
Save Changes and Reset
Acve this opon to reset system aer saving the
changes.
Opon available: Yes / No.
Discard Changes and Reset
Discards changes made and close the BIOS setup and
exit.
Opon available: Yes / No.
Restore Defaults
Press <Enter> on this item and then press <Y> key to
load the default BIOS sengs.
Opon available: Yes / No.
Boot Override
Press <Enter> to configure the device as the boot-up
drive.
Save & Exit
The Save & Exit menu displays the various opons to quit from the BIOS setup. Highlight any of the exit
opons then press <Enter>.