Gigabyte G1.Assassin - Page 40

BIOS Setup - 40 -

The Functions of the <F11> and <F12> keys (For the Main Menu Only)

F11: Save CMOS to BIOS
 ThisfunctionallowsyoutosavethecurrentBIOSsettingstoaprole.Youcancreateupto8proles
(Prole1-8)andnameeachprole.Firstentertheprolename(toerasethedefaultprolename,use
the SPACE key) and then press <Enter> to complete.

F12: Load CMOS from BIOS
If your system becomes unstable and you have loaded the BIOS default settings, you can use this
functiontoloadtheBIOSsettingsfromaprolecreatedbefore,withoutthehasslesofreconguringthe
BIOSsettings.Firstselecttheproleyouwishtoload,thenpress<Enter>tocomplete.

MB Intelligent Tweaker(M.I.T.)
Usethismenutoconguretheclock,frequencyandvoltagesofyourCPU,memory,etc.

Standard CMOS Features
 Usethismenutocongurethesystemtimeanddate,harddrivetypes,andthetypeoferrorsthatstop
the system boot, etc.

Advanced BIOS Features
 Usethismenutocongurethedevicebootorder,advancedfeaturesavailableontheCPU,andthepri-
mary display adapter.

Integrated Peripherals
 Usethismenutocongureallperipheraldevices,suchasSATA,USB,integratedaudio,andintegrated
LAN, etc.

Power Management Setup
 Usethismenutocongureallthepower-savingfunctions.

PC Health Status
Use this menu to see information about autodetected system/CPU temperature, system voltage and fan
speed, etc.

Load Fail-Safe Defaults
Fail-Safe defaults are factory settings for the most stable, minimal-performance system operations.

Load Optimized Defaults
Optimized defaults are factory settings for optimal-performance system operations.

Set Supervisor Password
Change, set, or disable password. It allows you to restrict access to the system and BIOS Setup.
A supervisor password allows you to make changes in BIOS Setup.

Set User Password
Change, set, or disable password. It allows you to restrict access to the system and BIOS Setup.
A user password only allows you to view the BIOS settings but not to make changes.

Save & Exit Setup
Save all the changes made in the BIOS Setup program to the CMOS and exit BIOS Setup. (Pressing
<F10> can also carry out this task.)

Exit Without Saving
 Abandonallchangesandtheprevioussettingsremainineffect.Pressing<Y>totheconrmationmes-
sage will exit BIOS Setup. (Pressing <Esc> can also carry out this task.)