Gigabyte G1.Assassin - Page 70

Unique Features - 70 -
Step 3:
When partitioning your hard drive, make sure to
leave unallocated space (10 GB or more is recom-
mended; actual size requirements vary, depending
on the amount of data) and begin the installation of
the operating system.
Step 4:
After the operating system is installed, click Start,
right-click the Computer and select Manage. Go to
Disk Management to check disk allocation.
Step 5:
Xpress Recovery2 will save the backup le to the unallocated
space (black stripe along the top). Please note that if there is no
enough unallocated space, Xpress Recovery2 cannot save the
backuple.
Step 1:
Select BACKUP to start backing up your hard drive
data.
Step 2:
Whennished, go to Disk Management to check
disk allocation.
B. Accessing Xpress Recovery2
1. BootfromthemotherboarddriverdisktoaccessXpressRecovery2forthersttime.Whenyouseethe
following message:
Press any key to startup Xpress Recovery2
, press any key
to enter Xpress Recovery2.
2. Afteryou use the backup function in Xpress Recovery2forthe rst time, Xpress Recovery2 will stay
permanent in your hard drive. If you wish to enter Xpress Recovery2 later, simply press <F9> during the
POST.
C. Using the Backup Function in Xpress Recovery2
Xpress Recovery2 will automatically create a
newpartitiontostorethebackupimagele.