Gigabyte GA-2CEWH - Page 26

26
GA-2CEWH Motherboard
M ) F_Panel1 (2X10 Pins)
Please connect the power LED, PC speaker, reset switch and power switch etc of your chassis
front panel to the front panel jumper according to the pin assignment below.
Pin No Signal Name Description
1 HD_LED+ Hard Disk LED pull up (330 ohm)
2 PWE_LED- Power Sleep LED (Pull up 330 ohm)
3 HD_LED- Hard Disk Active LED Signal
4 PWE_LED- Suspend LED Button(Blinking)
5 RST_SW- Reset Switch
6 PWR_BTN+ Front Panel Power On/Off Button Signal
7 RST_SW+ Reset Switch
8 PWR_BTN- Front Panel Power On/Off Button Signal(GND)
9 NC No Connect
10 KEY KEY
11 KEY KEY Pin
12 KEY KEY
13 KEY KEY
14 +5V Speaker connector (5V Standby)
15 NC No Connect
16 NC No Connect
17 NC No Connect
18 NC No Connect
19 NC No Connect
20 SPEAK- Speaker connector
1
2
19
20
RST_SW+
HD_LED+
RST _SW-
NC
PWE_LED+
PWE_LED -
PWR_BTN+
PWR _BTN-
+5V
SPK
NC
NC
Power Sleep LED
IDE Hard Disk
Active LED
HD_LED+
Soft Power
Connector
Speaker
Connector
Reset Switch