Connector Introduction
31
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent
type recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer’s instructions.
V ) BT (Battery)
If you want to erase CMOS...
1.Turn OFF the computer and unplug the power cord.
2.Remove the battery, wait for 30 second.
3.Re-install the battery.
4.Plug the power cord and turn ON the computer.
+
W / X ) FAN1 /FAN 5 (CPU 0/1 Fan Connectors)
1
Please note, a proper installation of the CPU cooler is essential to prevent the CPU from running
under abnormal condition or damaged by overheating.The CPU fan connector supports Max.
current up to 600 mA.
CPU1_FAN
CPU0_FAN
1
Pin No. Definition
1 GND
2 +12V
3 Sense
4 Control
Note: Pin 4 is reserved
for 4-pins Fan connector
To Next Page
Loading...
