- 16 - Hardware Installation
1-6 Internal Connectors
Read the following guidelines before connecting external devices:
• First make sure your devices are compliant with the connectors you wish to connect.
• Before installing the devices, be sure to turn off the devices and your computer. Unplug the
power cord from the power outlet to prevent damage to the devices.
• After installing the device and before turning on the computer, make sure the device cable has
been securely attached to the connector on the motherboard.
1) P1
2) P2_CPU1
3) CASE_OPEN1
4) PWR_DET1
5) FAN4 (System Fan)
6) FAN1 (CPU Fan)
7) BAT1
8) SATA0/1/2/3/4/5
9) USB1
10) USB2
11) USB_A1
12) SGPIO1
13) HD_LED1
14) F_PANEL2
15) TPM_1
16) COM2
To Next Page
Loading...
