Gigabyte GA-6UASL1 - Boot Options and Manager

- 56 - BIOS Setup
2-5 Boot Option Menu
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
message if the drive(s) specied is not bootable.
By default, the server searches for boot devices in the following order:
1. Hard drive.
2. UEFI device.
3. Optical disc drive.
4. Removable device.
UEFI Boot Device Priority
Press Enter to congure the boot priority.
Hard Disk Drive Priority
Press Enter to congure the boot priority.
Optical Disk Drive Priority
Press Enter to congure the boot priority.
Removable Disk Drive Priority
Press Enter to congure the boot priority.
Network Device Priority
Press Enter to congure the boot priority.
Quiet Boot
Enables or disables the quick boot function to speed up the system boot-up process to shorten the wait-
ing time for entering the operating system and to deliver greater efciency for daily use.
Options available: Enabled/Disabled. Default setting is Enabled.
Bootup NumLock
Enable or Disable Bootup NumLock function.
Options available: On/Off. Default setting is On.
POST Error Pause
Select whether to pause POST when a boot-up error is detected.
Options available: Enabled/Disabled. Default setting is Enabled.