EasyManuals Logo

Gigabyte GA-C1007UN User Manual

Gigabyte GA-C1007UN
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
- 25 -
j Only for the GA-C1007UN.
& Legacy USB Support
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
& EHCI Hand-off
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support. (Default: Disabled)
& Port 60/64 Emulation
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default: Disabled)
& USB Storage Devices
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.
& PATA Controller(JMicron JMB368 IDE Controller)j
Enables or disables the JMicron JMB368 IDE controller. This section below provides information on the
device connected to. The section below provides information on the device(s) connected to this connector.
(Default: IDE Mode)
& OnBoardLANController#1(LAN1)
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& OnBoardLANController#2(LAN2)
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
` SuperIOConguration
ThissectionprovidesinformationonthesuperI/Ochipandallowsyoutoconguretheserialportand
parallel port.
& Serial Port A (Serial Port on the Back Panel)
Enables or disables the onboard serial port. (Default: Enabled)
& SerialPortB(OnboardCOMBConnector)
Enables or disables the onboard serial port. (Default: Enabled)
& Parallel Port
Enables or disables the onboard parallel port. (Default: Enabled)
& Device Mode
ThisitemiscongurableonlywhenParallel Port is set to Enabled. Selects an operating mode for the
onboard parallel (LPT) port. Options are: Standard Parallel Port Mode (Default), EPP Mode (Enhanced
Parallel Port), ECP Mode (Extended Capabilities Port), EPP Mode & ECP Mode.
` Intel(R) Smart Connect Technology
& ISCTConguration
Enables or disables Intel Smart Connect Technology. (Default: Disabled)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gigabyte GA-C1007UN and is the answer not in the manual?

Gigabyte GA-C1007UN Specifications

General IconGeneral
BrandGigabyte
ModelGA-C1007UN
CategoryMotherboard
LanguageEnglish

Related product manuals