To Next Page

To Previous Page

- 28 -

& BootOverride

Allows you to select a device to boot immediately. Press <Enter> on the device you select and select Yes

toconrm.Yoursystemwillrestartautomaticallyandbootfromthatdevice.

& SaveProles

 ThisfunctionallowsyoutosavethecurrentBIOSsettingstoaprole.Youcancreateupto8prolesand

saveasSetupProle1~SetupProle8.Press<Enter>tocomplete.OryoucanselectSelect File in

HDD/USB/FDDtosavetheproletoyourstoragedevice.

& LoadProles

If your system becomes unstable and you have loaded the BIOS default settings, you can use this function

toloadtheBIOSsettingsfromaprolecreatedbefore,withoutthehasslesofreconguringtheBIOS

settings.Firstselecttheproleyouwishtoloadandthenpress<Enter>tocomplete.YoucanselectSelect

File in HDD/USB/FDDtoinputtheprolepreviouslycreatedfromyourstoragedeviceorloadtheprole

automatically created by the BIOS, such as reverting the BIOS settings to the last settings that worked

properly (last known good record).

Chapter 3 Drivers Installation

• Beforeinstallingthedrivers,rstinstalltheoperatingsystem.

• After installing the operating system, insert the motherboard driver disk into your optical drive. The

driver Autorun screen is automatically displayed which looks like that shown in the screen shot

below. (If the driver Autorun screen does not appear automatically, go to My Computer, double-click

the optical drive and execute the Run.exe program.)

After inserting the driver disk, "Xpress Install" will automatically scan your system and then list all the drivers that

are recommended to install. You can click the Install All button and "Xpress Install" will install all the recommended

drivers. Or click Install Single Items to manually select the drivers you wish to install.

Gigabyte GA-C1007UN User Manual

Questions and Answers: