Gigabyte GA-K8N Pro - Onboard Serial Port 1

- 49 - BIOS Setup
English
Serial ATA Function
RAID Select onboard serial ATA chip function as RAID. (Default value)
BASE Select onboard serial ATA chip function as base.
Onboard Giga-RAID
Enabled Enable onboard GigaRAID chip function. (Default value)
Disabled Disable this function.
Giga-RAID Function
RAID Select onboard Giga-RAID chip function as RAID. (Default value)
BASE Select onboard Giga-RAID chip function as base.
Onboard 1394
Enabled Auto detect onboard 1394 function. (Default Value)
Disabled Disable this function.
Onboard LAN Control
Enabled Enable Onboard LAN chip function. (Default value)
Disabled Disable this function.
Onboard LAN Boot Rom
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled Enable Onboard LAN chip function.
Disabled Disable this function. (Default value)
Onboard Serial Port 1
Disabled Disable onboard Serial port 1.
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8, using IRQ4. (Default value)
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8, using IRQ3.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8, using IRQ4.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8, using IRQ3.
Auto BIOS will automatically setup the port 1 address.
K8n pro_1001_b.p65 2003/8/18, ¤U¤È 06:0849