Technical Reference- 80 -
English
4 Channel Analog Audio Output Mode
STEP 1 :
Connect the front channels to "Line Out",
the rear channels to "Line In".
STEP 3 :
Select "Speaker Configuration", and choose the
"4 channel for 4 speakers out put".
Disable "Only SURROUND-KIT", and press
"OK".
When the "Environment settings" is "None", the
sound would be performed as stereo mode
(2 channels output). Please select the other
settings for 4 channels output.
STEP 2 :
After installation of the audio driver, you'll find an
icon on the taskbar's status area. Click the audio
icon "Sound Effect" from the windows tray at the bot-
tom of the screen.
Line Out Line In
K8n pro_1001_t.p65 2003/8/18, ¤U¤È 06:1080
To Next Page
Loading...