Gigabyte GA-K8RS482M-FS-02 - S_Ata0;S_Ata1;S_Ata2;S

To Next Page

To Previous Page

K8RS482M-FS-02 Motherboard - 10 -

English

6) IDE1 / IDE2 (IDE Connector)

An IDE device connects to the computer via an IDE connector. One IDE connector can connect to

one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical

drive). If you wish to connect two IDE devices, please set the jumper on one IDE device as Master

and the other as Slave (for information on settings, please refer to the instructions located on the IDE

device).

Pin No. Definition

1 GND

2 TXP

3 TXN

4 GND

5RXN

6 RXP

7 GND

3940

IDE1

IDE2

7) S_ATA0/S_ATA1/S_ATA2/S_ATA3

Serial ATA can provide 150MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA

and install the proper driver in order to work properly.

Gigabyte GA-K8RS482M-FS-02 - S_Ata0;S_Ata1;S_Ata2;S_Ata3