BIOS Setup- 23 -
English
Onboard H/W 1394
Enabled Enable onboard IEEE 1394 function.(Default value)
Disabled Disable this function.
On-Chip USB 1.1 Controller
Disable USB1.1 Host Controller if you are not using high speed USB devices.
Enabled Enable USB 1.1 Controller. (Default value)
Disabled Disable USB 1.1 Controller.
On-Chip USB 2.0 Controller
Disable USB2.0 Host Controller if you are not using high speed USB devices.
Enabled Enable USB 2.0 Controller. (Default value)
Disabled Disable USB 2.0 Controller.
USB Keyboard Support
When USB Keyboard is installed, please set at Enable.
Enabled Enable USB Keyboard Support. (Default value)
Disabled Disable USB Keyboard Support.
USB Mouse Support
When USB Mouse is installed, please set at Enable.
Enabled Enable USB Mouse Support.(Default value)
Disabled Disable USB Mouse Support.
Onboard LAN Boot ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled Enable this function.
Disabled Disable this function. (Default value)
Onboard Serial Port 1
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value)
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8.
Disabled Disable onboard Serial port 1.
To Next Page
Loading...
