Gigabyte GA-X79-UD3 - Page 41

- 41 - BIOS Setup
(Note) This item is present only when you install a memory module that supports this feature.
Extreme Memory Profile (X.M.P.) &
(Note)
, System Memory Multiplier (SPD), Memory
Frequency(Mhz)
The settings under the three items above are synchronous to those under the same items on the Advanced
Frequency Settings menu.
Performance Enhance &
Allows the system to operate at three different performance levels.
Normal Lets the system operate at its basic performance level. 
Turbo Lets the system operate at its good performance level. (Default) 
Extreme Lets the system operate at its best performance level. 
DRAM Timing Selectable &
Quick and Expert allows the Channel Interleaving, Rank Interleaving, and memory timing settings below
to be congurable. Options are: Auto (default), Quick, Expert.
Prole DDR Voltage &
When using a non-XMP memory module or Extreme Memory Prole (X.M.P.) is set to Disabled, this item
will display as 1.50V. When Extreme Memory Prole (X.M.P.) is set to Prole1 or Prole2, this item will
display the value based on the SPD data on the XMP memory.
Prole VTT Voltage &
The value displayed here is dependent on the CPU being used.
Memory Frequency(Mhz) &
The rst memory frequency value is the normal operating frequency of the memory being used; the second
is the memory frequency that is automatically adjusted according to the Host Clock Frequency, Processor
Base Clock, and System Memory Multiplier settings.
Advanced Memory Settings `