- 73 - Unique Features
SMART Recovery 2
Smart Recovery 2 allows you to back up a partition as an image le every hour. You can use these
images to restore your system or les when needed.
Supported operating systems: Windows 7 and Vista. •
Smart Recovery 2 only supports NTFS le system.
•
You need to select the destination partition in Settings the rst time
•
you use Smart Recovery 2.
The
• Backup Now button will be available only after you log in
Windows for ten minutes.
Creating a backup:
Click the Settings button on the main menu. In the Settings dialog
box, select the source partition and destination partition and click OK.
The initial backup will start after 10 minutes and regular backup will be
performed hourly. Note: By default, all partitions on the system drive
are selected as the backup source. The backup destination cannot be
on the same partition as the backup source.
Recovering a le:
Click the File Recovery button on the main menu. Use the time slider on
the top of the popped out window to select a previous backup time. The
right pane will display the backed-up partitions in the backup destination
(in the My Backup folder). Browse to the le you want and copy it.
The Smart Recovery 2 main menu:
Button Function
Settings Allows you to select the source and destination partition
Backup Now Allows you to perform the backup immediately
File Recovery... Allows you to recover your les from the backup image
System
Recovery...
Allows you to recover your system from the backup
image
To Next Page
Loading...
