Gigabyte GA-X79-UD3 - 2-6 Peripherals

- 53 - BIOS Setup
2-6 Peripherals
LAN PXE Boot Option ROM &
Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default:
Disabled)
LAN Controller &
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
Audio Device Control &
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
USB 2.0 Devices (Intel X79 Chipset) &
Enables or disables the USB 2.0 controllers integrated with the Intel X79 Chipset. (Default: Enabled)
Intel SATA Control Mode &
Enables or disables RAID for the SATA controllers integrated in the Intel X79 Chipset or congures the
SATA controllers to AHCI mode.
IDE Mode Disables RAID for the SATA controllers and congures the SATA controllers to IDE 
mode.
RAID Mode Enables RAID for the SATA controllers. 
AHCI Mode Congures the SATA controllers to AHCI mode. Advanced Host Controller Interface 
(AHCI) is an interface specication that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
Disabled Disables the SATA controllers. 
Legacy USB Support &
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
USB3.0 Support (Fresco FL1009 USB Controllers) &
Enables or disables the Fresco FL1009 USB 3.0 controllers. (Default: Enabled)