Gigabyte GS-R12P4E - Page 12

Hardware Installation
- 12 -
Rear Panel I/O  4 x USB 2.0/1.1 ports
 2 x RJ-45 port
 1 x COM port
 1 x VGA port
 1 x ID Switch button
Front Panel I/O  2 x USB 2.0/1.1 ports
Front Panel
LED/Buttons
 1 x Power button/LED
 1 x NMI button
 1 x ID Switch button/LED
 1 x Reset button
 2 x LAN LED
 1 x System status LED
 1 x HDD status LED
I/O Controller  ASPEED
®
AST2300 BMC chip
Hardware
Monitor
 System voltage detection
 CPU/System temperature detection
BIOS  1 x 64 Mbit ash
 AMI BIOS
Environment
Ambient
Temperature
Relative
Humidity
 Operating Temperature: 5
o
C to 35
o
C
 Non-operating Temperature: 0
o
C to 50
o
C
 10-80% operating Humidity at 30
o
C
System
Dimension
 444Wx43.5Hx615D (mm)
Electrical
Power Supply
 Fixed 1U PSU 500W 100-240VAC at 80 plus gold level (GS-R12P4E/GS-R12P8E)
 Fixed 1U PSU 400W 100-240VAC at 80 plus gold level (GS-R12P4F/GS-R12P8F)
* GIGABYTE reserves the right to make any changes to the product specications and product-related information
without prior notice.