Gigabyte GS-R12P4E - 1-2 Product Specifications

- 11 -
Hardware Installation
1-2 ProductSpecications
CPU  Support for Dual Intel
®
Xeon
®
Sandy-bridge-EN processors in 1356 socket
 Intel
®
Xeon
®
Quad/Eight Core in LGA 1356 socket
 Supports QuickPath Interconnect up to 8GT/s
 Enhanced Intel SpeedStep Technology (EIST) & Demand BasedSwitch (DBS)
 Enhanced Intel SpeedStep Technology (EIST)
 Support Intel Virtualization Technology (VT)
Chipset  Intel
®
C602 (Patsburg) Chipset
Memory  12 x 1.5V DDR3 DIMM sockets supporting up to 384 GB of systemmemory
 12 x 1.35V DDR3L DIMM sockets supporting up to 384 GB of system memory
 3 channel memory architecture
 Support for 1066/1333/1600 memory modules
 Support for ECC RDIMM/ UDIMM memory modules
LAN  Intel
®
I350 supports 10/100/1000 Mbps
 1 x KVM management LAN port
Expansion Slot  1 x PCI Express x16 slot supports:
• 1 x Low-prole PCIe x16 slot (Gen3 x8 bus)
• 1 x Low-prole PCIe x8 slot (Gen3 x8 bus)
Onboard
Graphics
 ASPEED
®
AST2300 supports 16MB VRAM
Mass Storage
(GS-R12P4E)
(GS-R12P4F)
 4 x 3.5” Hot-Swap SATA HDDs
 Support for Intel IRST SATA RAID 0, RAID 1, RAID 5, RAID 10
Mass Storage
(GS-R12P8E)
(GS-R12P8F)
 8 x 2.5” Hot-Swap SATA HDDs
 Support for Intel IRST SATA RAID 0, RAID 1, RAID 5, RAID 10
System Fans  5 x 40x40x28mm 18000rpm
 1 x 40x40x56mm Front: 16000rpm/Rear: 15400rpm
USB  Up to 6 USB 2.0/1.1 ports (4 on the back panel, 2 at the front panel)
Internal
Connectors
 1 x 24-pin ATX main power connector
 2 x 8-pin ATX 12V power connector
 2 x SATA 6Gb/s connectors (SATA0/1)
 4 x SATA 3Gb/s connectors (SATA2/3/4/5)
 2 x Mini SAS connector (8 SATA/SAS ports (3Gb/s) via SCU)
 1 x PMBus connector
 1 x Front panel header
 1 x Back plance header
 1 x SCU Key header
 1 x IPMI connector
 1 x TPM connector
 1 x USB 2.0/1.1 connector
 1 x Serial port connector
 1 x SPGIO header