Gigabyte GS-R12P4E - 4-2 Jumpers Setting

- 35 -
Hardware Installation
4-2 Jumper Setting
No. Jumper Code Jumper Setting
1.
CLR_CMOS1
(Clearing CMOS Jumper)
1-2 Close: Normal operation (Default setting)
2-3 Close: Clear CMOS data
2.
BIOS_RVCR1
(BIOS Recovery Jumper)
1-2 Close: Normal operation (Default setting)
2-3 Close: BIOS recovery mode.
3.
BIOS_WP
(BIOS Write Protect
Jumper)
1-2 Close: Normal operation. (Default setting)
2-3 Close: Disable ME function.
4.
PASSWORD5
(Skip Supervisor
Password Jumper)
1-2 Close: Normal operation (Default setting)
2-3 Close: Skip supervisor password.
2
4
5
1
8
9
6
7
3