BIOS Setup - 61 -
Numa
Enable/Disable Non Uniform Memory Access (NUMA) function.
Options available: Enabled/Disabled. Default setting is Enabled.
Thermal Throtting
Options available: CLTT/OLTT. Default setting is CLTT.
DIMM Voltage
Congure the DIMM voltage.
Options available: Auto/ Force 1.5v/Force 1.35v. Default setting is Auto.
Enforce DIMM
To enforce POR function. When disabled, the system will enforce 1600MHz LRDIMM.
Options available: Enforce EN/Stretch EN/Enforce DIS. Default setting is Enforce DIS.
To clear ECC Flag
When DDR3 Channel is maskoff after ECC multibit errors, it is required to clear ECC flag to make
masked off channels be available.
Options available: None/To clear ECC Flag when save and exit. Default setting is None.
To Next Page
Loading...
