LCD Monitor User's Manual
-
38
-
Other Settings • Resolution Notice: When this function is enabled,
the current resolution message will appear on the
screen when the monitor switches to another input
source.
• Input Auto Switch: When this function is enabled, it
automatically switches to an available input source.
• Auto Power O: When this function is enabled,
the monitor will automatically turn o after a
certain amount of time.
• LED Indicator:
By default, the LED indicator is set to Always
ON.
Always ON: The Power LED lights white
during operation and lights on and o in
standby mode(with 1 sec interval).
Always OFF: Turn o the Power LED.
Standby ON: The Power LED remains o
during operation and lights on and o in
standby mode(with 1 sec interval).
When the power supply is switched o, the
Power LED will remain o.
• Standby Charge: When this function is enabled,
increase Type-C charging wattage when the
screen is in standby mode.
• Type-C Compatibility: Compat with device
which does not support DSC when turn this
option into ON.
• USB Charge: Turn On or O. On: DC o/Saving
mode can to electrify for USB port. O: DC o/
Saving mode can't to electrify for USB port.
To Next Page
Loading...
