Gigabyte MC62-G41 - Back Panel Connectors

- 15 -
Hardware Installation
1-7 Back Panel Connectors
1
VGA Port
Connect to a monitor device.
2
ID button with LED
Whenthesystemidenticationisactive,theIDLEDonthefront/backpanelglowsblue.
3
USB 3.2 Type-A Port
The USB port supports the USB 3.2 specification. Use this port for USB devices such as a USB
keyboard/mouse,USBprinter,USBashdriveetc.
4
USB 3.2 Type-C Port
The USB port supports the USB 3.2 specification. Use this port for USB devices such as a USB
keyboard/mouse,USBprinter,USBashdriveetc.
5
GbE LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. See the section
below for a description of the states of the LAN port LEDs.
6
USB 3.2 Ports
The USB port supports the USB 3.2 specification. Use this port for USB devices such as a USB
keyboard/mouse,USBprinter,USBashdriveetc.
7
10/100/1000 Server Management LAN Port
The LAN port provides Internet connection with data transfer speeds of 10/100/1000Mbps. This port is
the dedicated LAN port for Server Management.
8
Line In Jack (Blue)
ThedefaultLineinjack.Usethisaudiojackforlineindevicessuchasanopticaldrive,walkman,etc
9
Line Out Jack (Green)
ThedefaultLineOutjack.Usethisaudiojackforaheadphoneor2-channelspeaker.Thisjackcanbe
usedtoconnectfrontspeakersina4/5.1/7.1-channelaudioconguration.
10
Mic In Jack (Pink)
ThedefaultMICInjack.AmicrophonecanbeconnectedtotheMICInjack.
1
2
3
4
5
6
8
7
9
6
10