Gigabyte MC62-G41 - FCH Common Options

- 76 -
BIOS Setup
2-3-5 FCH Common Options
Parameter Description
FCH Common Options
SATACongurationOptions
Press[Enter]forcongurationofadvanceditems.

SATA Enable
– Enable/Disable OnChip SATA controller.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.

SATA Controller options
– Press[Enter]forcongurationofadvanceditems.
AC Power Loss Options
Press[Enter]forcongurationofadvanceditems.

AC Loss Control
– Selects the AC Loss Control Method.
– Options available: Power Off, Power On, Last State. Default setting
is Last State.
FCH RAS Options
Press[Enter]forcongurationofadvanceditems.

ALink RAS Support
– Enable/Disable the ALink RAS Support.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.

Resetaftersyncood
– Enable/DisableABto forwarddownstreamsync-oodmessageto
system controller.
– Options available: Auto, Enable, Disable. Default setting is Auto.