Gigabyte MS03-CE0 User Manual

- 61 -
BIOS Setup
Parameter
Description
MemoryRASConguration
(continued)

Leaky bucket time window based interface Hour
– Leaky bucket time window based interface hour used for DDR
(0-24).
– Press the <+> / <-> keys to increase or decrease the desired
values.

Leaky bucket time window based interface Minute
– Leaky bucket time window based interface minute used for DDR
(0-60).
– Press the <+> / <-> keys to increase or decrease the desired
values.

Leaky bucket low bit
– Conguresleakybucketlowbit(0x1-0x29).
– Press the <+> / <-> keys to increase or decrease the desired
values.

Leaky bucket high bit
– Conguresleakybuckethighbit(0x1-0x29).
– Press the <+> / <-> keys to increase or decrease the desired
values.

ADDDC Sparing
(Note)
– Enable/Disable ADDDC Sparing.
– Options available: Disabled, Enabled. Default setting is
Disabled.

EnableADDDCErrorInjection
– Options available: Disabled, Enabled. Default setting is
Enabled.

Patrol Scrub
– Options available: Disabled, Enable at End of POST. Default
setting is Enable at End of POST.

Patrol Scrub Interval
– Selects the number of hours (1-24) required to complete full
scrub. A value of zero means auto.

DDR5 ECS
– Options available: Disabled, Enabled, Enable ECS with Result
Collection. Default setting is Enabled.
(Note) Advanceditemspromptwhenthisitemisdened.

Gigabyte MS03-CE0 Specifications

General

Brand	Gigabyte
Model	MS03-CE0
Category	Motherboard
Language	English