EasyManua.ls Logo

Gigabyte MU92-TU0 - Ipv4 Network Configuration

Gigabyte MU92-TU0
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 49 - BIOS Setup
2-2-13 IPv4 Network Conguration
Parameter Description
Congured
Indicateswhethernetworkaddressisconguredsuccessfullyornot.
Options available: Enabled, Disabled. Default setting is Disabled.
Enable DHCP
(Note)
Options available: Enabled, Disabled. Default setting is Disabled.
Local IP Address
(Note)
Press[Enter]tocongurelocalIPaddress.
Local NetMask
(Note)
Press[Enter]tocongurelocalNetMask.
Local Gateway
(Note)
Press[Enter]tocongurelocalGateway
Local DNS Servers
(Note)
Press[Enter]tocongurelocalDNSservers
Save Changes and Exit Press[Enter]tosaveallcongurations.
(Note) This item appears when Congured is set to Enabled.

Related product manuals