Gigabyte MU92-TU0 - Memory Configuration

- 57 - BIOS Setup
2-3-4 Memory Conguration
Parameter
Description
Integrated Memory Controller (iMC)
Enforce POR
When set to Enable, the system enforces Plan Of Record restrictions
for DDR4 frequency and voltage programming.
Options available: POR, Disable. Default setting is POR.
Enforce Population POR
Enable/Disable memory population POR enforcement.
Options available: Disable Enforcement, Enforce Supported
Populations, Enforce Validated Populations.
Default setting is Enforce Supported Populations.
Memory Frequency
Conguresthemaximummemoryfrequency.IfEnforcePORis
disabled, user will be able to run at higher frequencies than the
memory support (limited by processor support).
Default setting is Auto.
Enable ADR
Enables the detecting and enabling of ADR (Asynchronous DRAM
Refresh) function.
Options available: Enable, Disable. Default setting is Enable.
Legacy ADR Mode
Enable/Disable the Legacy ADR Mode.
Options available: Enable, Disable. Default setting is Disable.
Minimum System Memory Size
Congurestheminimummemorysize.
Options available: 2GB, 4GB, 6GB, 8GB. Default setting is 2GB.
NVDIMM Energy Policy
Sets the energy policy for NVDIMMs.
Options available: Device-Managed, Host-Managed. Default setting
is Device-Managed.