Gigabyte MX32-4L0 - PCH-Io Configuration

- 61 - BIOS Setup
2-3-20 PCH-IOConguration
Parameter
Description
PCH-IOConguration
SATAConguration
Press[Enter]tocongureadvanceditems.

SATA Controller
– Enable/Disable SATA controller.
– Options available: Enabled/Disabled. Default setting is Enabled.

SATA Mode Selection
– ConguresonchipSATAtype.
– AHCI Mode: When set to AHCI, the SATA controller enables its
AHCI functionality. Then the RAID function is disabled and cannot
be access the RAID setup utility at boot time.
– RAID Mode: When set to RAID, the SATA controller enables both
its RAID and AHCI functions. You will be allowed to access the
RAID setup utility at boot time.
– Options available: AHCI/RAID. Default setting is AHCI.

SATA Port 0/1/2/3/4/5/6/7
– ThecategoryidentiesSATAharddrivesthatareinstalledinthe
computer. System will automatically detect HDD type.
SecurityConguration
Press[Enter]tocongureadvanceditems.

BIOS Lock
– Enable/Disable the PCH BIOS Lock Enable feature.
– Options available: Enabled/Disabled. Default setting is Disabled.