Gigabyte R282-Z93 User Manual

- 11 - Hardware Installation
1-1 Installation Precautions
The motherboard/system contain numerous delicate electronic circuits and components which
can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully
read the service guide and follow these procedures:
• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or
warranty sticker provided by your dealer. These stickers are required for warranty validation.
• Always remove the AC power by unplugging the power cord from the power outlet before
installing or removing the motherboard or other hardware components.
• When connecting hardware components to the internal connectors on the motherboard,
make sure they are connected tightly and securely.
• When handling the motherboard, avoid touching any metal leads or connectors.
• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic
components such as a motherboard, CPU or memory. If you do not have an ESD wrist
strap, keep your hands dry and rst touch a metal object to eliminate static electricity.
• Prior to installing the motherboard, please have it on top of an antistatic pad or within an
electrostatic shielding container.
• Before unplugging the power supply cable from the motherboard, make sure the power
supply has been turned off.
• Before turning on the power, make sure the power supply voltage has been set according to
the local voltage standard.
• Before using the product, please verify that all cables and power connectors of your
hardware components are connected.
• To prevent damage to the motherboard, do not allow screws to come in contact with the
motherboard circuit or its components.
• Make sure there are no leftover screws or metal components placed on the motherboard or
within the computer casing.
• Do not place the computer system on an uneven surface .
• Do not place the computer system in a high-temperature environment.
• Turning on the computer power during the installation process can lead to damage to
system components as well as physical harm to the user.
• If you are uncertain about any installation steps or have a problem related to the use of the
product, please consult a certied computer technician.
Chapter 1 Hardware Installation

Gigabyte R282-Z93 Specifications

General

Processor family	AMD
Processor socket	Socket SP3
Built-in processor	No
Motherboard chipset	-
Compatible processor series	AMD EPYC
Number of processors supported	2
Hot-swap HDD bays	Yes
Storage drive sizes supported	2.5, 3.5 \
Supported storage drive types	HDD & SSD
Number of storage drives supported	12
Supported storage drive interfaces	Serial ATA III
PCI Express x16 slots	6
PCI Express slots version	4.0
PCI Express x8 (Gen 3.x) slots	1
Power supply	2000 W
Input current	10 - 12 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
80 PLUS certification	80 PLUS Platinum
Memory channels	Octa-channel
Number of DIMM slots	32
Supported memory types	DDR4-SDRAM
Maximum internal memory	128 GB
Supported RDIMM clock speeds	2933, 3200 MHz
Discrete graphics card model	Not available
On-board graphics card model	Aspeed AST2500
Chassis type	Rack (2U)
Fan diameter	80 mm
Product color	Black
Number of fans	4 fan(s)
LAN controller	Intel® I350-AM2
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Fast Ethernet, Gigabit Ethernet
Sustainability certificates	RoHS
USB 2.0 ports quantity	0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	4
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	20 - 95 %
Operating relative humidity (H-H)	8 - 80 %
Package depth	588 mm
Package width	982 mm
Package height	268 mm
Package weight	25500 g

Weight and Dimensions

Depth	730 mm
Width	438 mm
Height	87 mm
Weight	18500 g