EasyManua.ls Logo

Gigabyte R282-Z93 - MAC Ipv4 Network Configuration

Gigabyte R282-Z93
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 81 - BIOS Setup
5-2-18 MAC IPv4 Network Conguration
Parameter Description
Congured
Indicates whether network address is congured successfully or not.
Options available: Disabled/Enabled. Default setting is Disabled.
Enable DHCP
(Note)
Options available: Enabled/Disabled. Default setting is Enabled.
Local IP Address
(Note)
Press [Enter] to congure local IP address.
Local NetMask
(Note)
Press [Enter] to congure local NetMask.
Local Gateway
(Note)
Press [Enter] to congure local Gateway
Local DNS Servers
(Note)
Press [Enter] to congure local DNS servers
Save Changes and Exit Press [Enter] and then choose to save or discard the changes made.
(Note) This item will appear on the screen when Congured is set to Enabled.

Table of Contents

Related product manuals