Gigabyte R282-Z93 - 5-8 Boot Menu

- 115 - BIOS Setup
5-8 Boot Menu
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
message if the legacy drive(s) specied is not bootable.
Parameter Description
Boot Conguration
Setup Prompt Timeout
Number of seconds to wait for setup activation key. 65535 (0xFFFF)
means indenite waiting.
Press the numeric keys to input the desired values.
Bootup NumLock State
Enable/Disable the Bootup NumLock function.
Options available: On/Off. Default setting is On.
Quiet Boot
Enable/Disable showing the logo during POST.
Options available: Disabled/Enabled. Default setting is Enabled.
Boot mode select
Selects the boot mode.
Options available: LEGACY/UEFI. Default setting is UEFI.
FIXED BOOT ORDER Priorities
Boot Option #1 / #2 / #3 / #4 /
#5
Press [Enter] to congure the boot priority.
By default, the server searches for boot devices in the following sequence:
1. Hard drive.
2. CD-COM/DVD drive.
3. USB device.
4. Network.
5. UEFI.