Gigabyte R282-Z93 - FCH Common Options

- 97 - BIOS Setup
5-3-5 FCH Common Options
Parameter Description
FCH Common Options
SATA Conguration Options

SATA Enable
– Enable or disable OnChip SATA controller.
– Options available: Disabled/Enabled/Auto. Default setting is Auto.

SATA RAS Support
– Enable or disable SATA RAS support.
– Options available: Disabled/Enabled/Auto. Default setting is Auto.

Sata Disabled AHCI Prefetch Function
– Enable or disable Sata Disabled AHCI Prefetch Function.
– Options available: Disabled/Enabled/Auto. Default setting is Auto.

Aggressive SATA Device Sleep Port 0
– Options available: Disabled/Enabled/Auto. Default setting is Auto.

Aggressive SATA Device Sleep Port 1
– Options available: Disabled/Enabled/Auto. Default setting is Auto.