Gigabyte R282-Z93 - Page 96

BIOS Setup - 96 -
Parameter Description
NBIO RAS Common Options
(continued)

Sync Flood on PCIe Fatal Error
– When 'Sync Flood on PCIe Fatal Error' is True,
PcdAmdPcieSyncFloodOnFatal should be set to True. When 'Sync
Flood on PCIe Fatal Error' is False, PcdAmdPcieSyncFloodOnFatal
should be set to False. When 'Sync Flood on PCIe Fatal Error' is
Auto, PcdAmdPcieSyncFloodOnFatal should retain its AGESA
default.
– Options available: Auto/True/False. Default option is Auto.
Enable AER Cap
Enables Advanced Error Reporting Capabilty.
Options available: Enable/Disabled/Auto. Default option is Auto.
Early Link Speed
Sets Early Link Speed.
Options available: Auto/Gen1/Gen2. Default option is Auto.
Hot Plug Handling mode
Controls the Hot Plug Handling mode.
Options available: A0 Mode/OS First (No Error Handling)/OS First (Error
Handling - Not Implementd/Firmware First (Not Implemented)/Auto.
Default option is Auto.
Presence Detect Select mode
Controls the Presence Detect Select mode.
Options available: OR/And/Auto. Default option is Auto.
Preferred IO Device
Enter a value for the preferred IO device.
[23:16] Bus Number
[15:8] Dev Number
[7:0] Fun Number