Gigabyte R282-Z93 - Page 39

System Hardware Installation - 39 -
5
Follow these instructions to install a 2.5" hard disk drive:
1. Press the release button.
2. Extend the locking lever.
3. Pull the locking lever in the direction indicated to remove the HDD tray.
4. Align the hard disk drive with the positioning screw on the HDD tray.
5. Secure the hard disk drive with ve screws.
6. Reinsert the HDD tray into the slot and close the locking lever.
4
5
Press
Pull
2
3
1