Gigaset 2015 - Resetting Gigaset 2000 S Handset to Default State

Important basic settings
25
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619
kap07.fm5
29.10.99
Resetting Gigaset 2000S handset to the default state
With this procedure you can change the following set-
tings back to the default (factory) state:
● volume of tone ringing (➔ page 29)
● pitch of tone ringing (➔ page 29)
● audio volume (➔ page 30)
● base station number display (➔ page 61)
● battery warning tone (➔ page 31)
● range warning tone (➔ page 31)
● synchronisation tone (➔ page 32)
● automatic call acceptance (➔ page 32)
● key acknowledgement tone (➔ page 30)
● positive acknowledgement tone (➔ page 31)
● negative acknowledgement tone (➔ page 31)
The following stored data is deleted:
● redial memory (➔ page 9)
● speed dialling memory (➔ page 33)
The stored handset PIN (➔ page 20) is not
deleted.
B
8
Q
Start the procedure.
o
Enter the 4-digit handset PIN (➔ page 20).
B
Reset the handset to the default state.