VI
kap00.fm5
29.10.99
Gigaset 2015 plus, GBR: A30852-X1105-B401-1-7619
LED display at the base station
Overview: symbols used in the operating instructions
➔ page VI
(cross-reference to a related topic)
Certification and CE marking
On/off key flashes: new messages are waiting.
Indicates the number of messages stored in the
answering machine.
If there are no new messages, the display is blank.
B
#*5
Press these handset keys in the order shown. The same
symbols/characters are indicated on the keys.
Í
Press this base station key. The same symbol is indicated
on the key. Alternatively, the key is described, e.g. “Press
green key at base station“.
1
...
6
Press one of the keys in the range indicated, e.g. a key
between 1 and 6.
o
Enter a number, e.g. a telephone number.
Where necessary, appropriate displays are provided on
the handset:
:
Attention - important note. Please read
carefully!
Additional information
Siemens Gigaset
2015 plus was certified according to
EU guideline 91/263/EEC (CTR 6, CTR 10). Anyone is
permitted to connect this telephone to a telephone jack
and use it.
This telephone fulfils the requirements of the following
EU guidelines:
89/336/EEC “Electromagnetic compatibility”
73/23/EEC “Electrical resources used within
specific voltage ranges”
The CE marking confirms the telephone is in compliance
with the above-mentioned guidelines (CE 0188 X)
h
05
3z
To Next Page
Loading...
