12
Gigaset A280 / CHN / A31008-M2045-Y101-3-7619 / main.fm / 26.05.2010
In talk mode:
c (activate talk mode) ¢ press and hold Q
The service provider is called. You will hear an
announcement of your service provider.
¢
~
Enter the IDD number.
You can also use the Qkey for IP dialling from
phone book, calls list, or redial list and dial the IP code
directly.
The prefix function (¢ page 19) is disabled when
using IP dialling.
Making calls (base)
Making an external call
External calls are calls using the public telephone net-
work.
~
(enter number in idle mode)
¢ ª (pick up receiver)
or
ª(pick up receiver) ¢
~
(enter number)
The phone number is dialled.
¤ To cancel the dialling replace the receiver.
Accepting a call
An incoming call is indicated by ringing and by flash-
ing of the ª and the Y icon on the display.
To accept an incoming call:
ª (pick up receiver) or
press d (hands-free talking)
You can adjust the ringer volume (¢ page 19) or
deactivate the ringer completely (¢ page 9).
Ending a call
Replace the receiver or
press d (end hands-free talking).
Hands-free talking
Activating while dialling:
~
enter phone number ¢ d.
Switching between earpiece and hands-free mode:
¤ During a call press the hands-free key d to acti-
vate or deactivate hands-free talking.
Adjusting the talking volume
There are 3 levels of earpiece volume (default: L2). You
can adjust earpiece volume during a call.
¤ Press [ / \ to increase/decrease volume.
The current setting is shown on the display.
Adjusting the loudspeaker volume
There are 5 levels of loudspeaker volume (default: L3).
You can adjust the loudspeaker volume during a call.
Precondition: Hands-free talking is activated.
¤ Press [ / \to increase/decrease volume.
The current setting is shown on the display.
Muting
You can mute your phone when making external
calls. The microphone is deactivated so that your con
-
versational partner can no longer hear you.
¤ To deactivate the microphone briefly press Ô.
The · icon appears on the display when the micro-
phone is deactivated.
IP dialling
You can use IP dialling to economically make interna-
tional calls.
Precondition: You own an IP dial service card and the
IP code is stored in the phone book via the handset
menu,
¢ page 15.
In idle mode:
~
(enter IDD (International Direct Dial) number)
¢press and hold Q
¢ª (pick up receiver) or press d.
Your Gigaset A280 will automatically pick the line and
add the IP code stored in the phone book as a prefix
to the IDD phone number.
In talk mode:
ª (pick up receiver) ¢ press and hold Q
The service provider is called. You will hear an
announcement of your service provider.
¢
~
Enter the IDD number.
You can also use the Qkey for IP dialling from
phone book, calls list, or redial list and dial the IP code
directly.
Please note
Dialling using phone book (
¢ page 15), redial
list (
¢ page 13) or calls list (¢ page 14) saves
you from having to re-enter numbers and net-
work provider prefixes.
To Next Page
