Gigaset A280 - Handset Settings Customization

18
Gigaset A280 / CHN / A31008-M2045-Y101-3-7619 / main.fm / 26.05.2010
Changing the handset name
You can change the default name of the handset
(default: Gigaset). Maximum characters: 10.
f¢PERSONAL SET ¢|
¢HANDSET NAME¢|
The current name is shown, last character flashing.
¤ Use { as backspace.
~
(enter name) ¢|
You will find information on multiple line input in the
appendix to this user guide,
¢ page 25.
Changing the ringer volume
You can choose between 5 sound levels for the ringer
volume;
LEVEL 1 – LEVEL 4 and RINGER OFF (default:
LEVEL 2).
f¢PERSONAL SET ¢|
¢HANDSET TONE¢|
¢RING VOLUME¢|
The currently set ringer melody is played with current
volume.
¢p (select volume level) ¢|
If the ringer is deactivated, the Ú icon appears in
the display. The handset will ring at
LEVEL 2 when its
base is paging it.
You can also deactivate the ringer completely using
the
* key.
Changing the ringer melody
You can choose between 10 ringer melodies
(default: MELODY 1).
f¢PERSONAL SET ¢|
¢HANDSET TONE¢|
¢RING TONES¢|
¢p (select melody)
The selected melody is played.
¤ To confirm a selected melody¢|
Setting the key beep
Your telephone will beep whenever a key on the
handset is pressed. You can deactivate this acoustical
signal (default:
ON).
f¢PERSONAL SET ¢|¢HANDSET
TONE¢|
¢KEY BEEP¢|
¢p (select ON or OFF) ¢|
Activating/deactivating auto answer
If you activate this function, when you receive a call
you can simply lift the handset out of the charging
cradle without having to press the talk key
c.
f¢PERSONAL SET ¢|¢AUTO ANSWER
¢|
¢p (select ON or OFF) ¢|
Setting date and time
f¢CLOCK/ALARM ¢|
¢ DATE & TIME¢|
¢
~
(enter date: MM/DD) ¢|
¢
~
(enter time: HH:MM, 24hrs format) ¢|
¤ Use { as backspace.
Setting the alarm clock
You can set an alarm clock on the handset.
Precondition: The date and time have already been
set, see above.
An alarm will sound for 1 minute at the set time once
or daily.
f¢CLOCK/ALARM ¢|¢ALARM¢|
¢p (select ON ONCE or ON DAILY or OFF) ¢|
If you select ON ONCE or ON DAILY
~
(enter time: HH-MM, 24hr format) ¢|
¤ Use { as backspace.
If the alarm is activated, the ¼ icon appears in the
display. During the alarm --ALARM-- is flashing on the
display.
¤ To cut off the alarm press any key on the keypad.
Setting the alarm melody
You can choose from 3 alarm melodies (default:
MELODY 1).
f¢CLOCK/ALARM ¢|
¢ALARM TONE¢|
¢p (select melody)
The selected melody is played.
¤ To confirm a selected melody¢|
Settings (base)
Setting date and time
Ì press and hold.
The display shows the date and time fields. The next
position to be filled in will flash.
~ (enter time (HH-MM) and date (MM/DD))
¤ To correct your input backspace withÔ.
¤ Press Ì to save the new clock settings.
Please note
Once the date and time are set, if there is a power
cut of the mains, you should reset date and time.