48
Setting the base
Gigaset E310/E310A / Great Britain / A31008-M2301-L101-1-7619 / T-NetBox-registration.fm /
Version 5, 03.04.2011
Restoring the handset
default settings
You can reset any individual settings
and changes that you have made.
This will not affect entries in the direc-
tory, calls list, date and time or the
handset's registration to the base.
§Menu§ ¤ q Settings ¤ §OK§
¤ q Handset ¤ §OK§
¤ q Reset Handset ¤ §OK§
¤ Reset? ¤ §OK§
Cancel the reset with a.
Setting the base
The base settings are made via a reg-
istered handset.
Changing the ring tones
for the Gigaset E310A
base
u Volume:
Five volume levels (1–5), "Off" (vol-
ume = 0) and Crescendo (volume
increases with each ring) can be set.
u Melody:
List of pre-loaded ringer melo-
dies. The first three melodies are
the "classical" ring tones.
§Menu§ ¤ q Settings ¤ §OK§
¤ q Base ¤ §OK§
¤ q Audio Settings ¤ §OK§
¤ q Ringer Volume/
Ringer Melody ¤
§OK§
¤ q (Select volume/melody)
¤
§OK§ (‰= selected)
Repeater support
You can increase the range and sig-
nal strength of the base using a
repeater. You will need to activate
repeater mode. This will terminate
any calls that are in progress at the
time.
§Menu§ ¤ q Settings ¤ §OK§
¤ q Base ¤ §OK§
¤ q Additional
¤
§OK§ ¤ q Repeater
¤
§OK§ (´=activated)
After activating or deactivating the
repeater, switch your handset off
and on again (¢ page 20).
Protecting against
unauthorised access
Protect the system settings of the
base with a system PIN known only
to you. You will need to enter the
system PIN when, for example, regis-
tering/de-registering a handset to/
from the base.
Please note
u Eco Mode / Eco Mode+
(¢ page 40) and repeater sup-
port cancel each other out, i.e.,
if you use a repeater, you can-
not use Eco Mode or Eco
Mode+.
u The default encrypted trans-
mission setting is deactivated
when repeater mode is acti-
vated.
To Next Page
Loading...
