Gigaset E370 - Page 46

Template Module, Version 1.2, 11.09.2018,
SMS (text messages)
Gigaset E370 / LUG_NF BE-NL en / A31008-M2815-M201-1-3F19 / applications_2.fm / 11/23/18
46
Entering/changing the SMS service centre / Setting the send service centre
SMS to PABXs
• The Call Line Identification must be forwarded to the extension of the PABX (CLIP).
• If necessary, the access code/outside line code must be prefixed to the number of the SMS
service centre (depending on your PABX). To test: Send an SMS to your own number, once
with the access code and once without.
• If the SMS is sent without the extension number, it will not be possible for the recipient to
answer directly.
Activating/deactivating first ring muting
Every incoming SMS is indicated by a single ring. If such a "call" is answered, the SMS is lost. To
prevent this, mute the first ring for all external calls. In idle status:
¤ . . . the current setting flashes in the input field
(e.g. 1) . . . then
¤ . . . use to select SMS OK Settings OK Service Centres
OK . . . use to select SMS service centre ( = current send service centre) Edit . . .
then
Activate send service centre:
Active Send: . . . use to selec
t Yes or No (Ye s = SMS messages are sent via
the SMS service centre)
Enter the number of the SMS service:
¤ SMS Service Centre Number . . . use to enter the number
Save settings: S
ave
If you have agreed a flat fixed line network rate, the chargeable numbers with dialling
code 09
00 are often blocked. If, in this case, a 0900 number is entered for the SMS
service centre, you will not be able to send text messages from your phone.
If the attempt to send fails, the SMS is saved in the incoming messages list and
indicat
ed as failed.
Do not mute
the first ringtone: ¤ OK
Mute the first ringtone (default setting):
¤ OK