Template Module, Version 1.2, 11.09.2018,
Operation with a router
Gigaset E370 / LUG_NF BE-NL en / A31008-M2815-M201-1-3F19 / extending.fm / 11/23/18
52
Operation with a router
When operating on the analogue connection of a router, any echoes that may occur can be
reduced by activating XES mode 1 (XES = eXtended Echo Suppression).
If the XES mode 1 doe
s not sufficiently suppress the occurring echoes: activate XES mode 2.
¤ . . . press one of the following keys
OK
Normal mode
OK XES mode 1
OK XES mode 2
Operation with a PABX
To find out which settings are required for a PABX, please refer to the PABX user guide.
You cannot send or receive SMS messages on P
ABXs that do not support Calling Line
Identification.
Setting Tone or Pulse dialling mode
¤ . . . use to select Settings OK Telephony OK Dialling
Mode OK . . . use to select Tone or Pulse Select ( = selected)
Setting the flash time
¤ . . . use to select Settings OK Telephony OK Recall OK
. . . possible flash times are listed . . . use to select flash time Select ( = selected)
If there are no problems with echoes, the normal mode (factory settings) should be
activated.
To Next Page
Loading...
