Gigaset E560A / LUG US en / A31008-M2728-R301-1-7619 / settings_HS.fm / 1/21/19
Template Module, Version 1.2, 11.09.2018
Handset settings
45
en fr es
Activating/deactivating the ringer
You can:
• Permanently deactivate the ringer in idle status or when receiving a call
• Deactivate the ringer for the current call only.
The ringer cannot be re-activated while a call is in progress.
Activating/deactivating visual call signal
Incoming calls are signalled visually (e.g. in noisy environments).
¤ Menu Settings OK Audio / Visual Signals OK LED Call Signal
OK (=activated)
Advisory/warning tones
Your handset uses advisory tones to tell you about different activities and statuses. The following
tones can be activated and deactivated independently of each other:
• Advisory Tones
• Key click: Every key press is confirmed.
• Error tone (descending tone sequence): When you make an incorrect entry.
• Battery Low Signal
The battery requires charging.
• Out of Range Signal
The handset is no longer in range of the base.
You cannot deactivate the confirmation tone for placing the handset in the base.
Activating/deactivating advisory tones
¤ Menu Settings OK Audio / Visual Signals OK Advisory Tones
OK (=on)
Activating/deactivating battery low beep
¤ Menu Settings OK Audio / Visual Signals OK Battery Low
Signal OK (=on)
Deactivating the ringer permanently:
¤ Press and hold the star key . ... the
icon appears in the display
Reactivating the ringer:
¤ Press and hold the star key .
Deactivating the ringer for the current call:
¤ Press the Silence display key.
• Confirmation tone (rising tone sequence): At the end of an entry/setting, when the
handset is placed in the base and on arrival of a new entry in the answer machine list.
To Next Page
