Gigaset E560A / LUG US en / A31008-M2728-R301-1-7619 / settings_BS.fm / 1/21/19
Template Module, Version 1.2, 11.09.2018
Base settings
47
en fr es
Base settings
The base settings are made using a registered handset.
Entering your own local area code
Please note the following for local calls (calls using the local fixed line network):
All the calls in the call list are saved with area codes. In order to be able to call back a caller from
the call list, you have to save the local area code in the phone for the area in which your phone
is located (Local Area Code). If your phone is in a "multiple area code" area, you also have to
enter the other area codes for this area as Extra Code .
Entering own local area code
¤ Menu Settings OK Telephony OK Area Codes OK Local
Area Code OK . . . use to enter own area code (3 digits exactly, 0 – 9) OK
Entering extra codes
¤ Menu Settings OK Telephony OK Area Codes OK ... use
to select entry (Extra Code 1 – Extra Code 5) OK . . . use to enter the extra code
(3 digits exactly, 0 – 9) OK
To delete an extra code entered before: press the display key Delete
¤ Repeat the steps above for all extra codes for your area. You can save a maximum of five extra
codes.
Activating/deactivating music on hold
¤ Menu Settings OK Telephony OK Music on Hold OK (=on)
Protecting against unauthorised access
Protect the system settings of the base with a system PIN known only to yourself. You will need
to enter the system PIN when, for example, registering/de-registering a handset to/from the
base.
Changing the system PIN
You can change the base's 4-digit default system PIN ("0000") to a 4-digit PIN known only to
yourself.
Changing the system PIN enables remote operation of the answer machine page 34.
¤ Menu Settings OK System OK System PIN OK System
PIN: (enter the current system PIN) OK New PIN: (enter your new system PIN) OK
To Next Page
Loading...
