Gigaset GL7 - Page 44

Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version X,X - xx.xx.xxxx
Additional functions (apps)
Gigaset GL7 / LUG IE-UK_INT en / A31008-N1199-L101-1-7619 / applications.fm / 7/4/22
44
Editing and deleting alarms
  Clock  OK  Alarm  OK  Select the alarm  Options
Change an alarm:
 Edit  OK  Change the required setting  Save
Clear an alarm:
 Delete  OK  Delete
Clear all alarms:
 Delete all  OK  Delete
Timer
The timer counts a defined time back to 0 (in seconds). When the timer
expires, an acoustic alarm sounds.
  Clock  OK  Timer  Select hours, minutes and seconds
and set them using the Control key
 Start
Editing the timer settings
  Clock  OK  Timer  Settings
Set vibration:
 Vibration  Enable/disable vibration  OK
Set the warning tone:
 Sound  Select the warning tone  OK
Stopwatch
The stopwatch stops times down to 1/100ths of a second.
  Clock  OK  Stopwatch
Interval counter
Whilst the stopwatch is running, you are able to stop intervals. For every
“in
terval”, the reading is shown on the display.
Start the stopwatch:  Start
Stop the stopwatch:
 Pause
Cancel the time measurement:
 Return
Continue the time measurement:
 Resume
Enable the interval counter:
 Lap