Gima 34340 - Instructions to User; Instructions for Safe Operations; Cautions; Warnings

25
ENGLISH
Instructions to User
Wrist Oximeter is a precision measuring device, please read the manual very
carefully before using this device.
Failure to follow these instructions may cause measuring abnormality or device
damage.
Notes:
• The contents contained in this manual are subjected to change without prior
notice.
• Information furnished by GIMA is believed to be accurate and reliable. How-
ever, no responsibility is assumed by us for its use, or any infringements of
patents or other rights of third parties that may result from its use.
Instructions for Safe Operations
Check the device to make sure that there is no visible damage that may
affect user’s safety and measurement performance. When there is obvi-
ous damage, stop using the device.
Necessary servicing must be performed by qualied service engineers
ONLY. Users are not permitted to maintain it by themselves.
The oximeter cannot be used together with the devices not specied in
User Manual.
Cautions
Explosive hazard—DO NOT use the oximeter in environment with in-
ammable gas such as some ignitable anesthetic agents.
DO NOT use the oximeter while the testee is under MRI or CT scanning.
Warnings
For individual patients, there should be a more prudent inspecting in
the placing process. The device can not be clipped on the edema and
tender tissue. The light (the infrared light is invisible) emitted from the
sensor is harmful to the eyes, so the user or even the service engineer
should not stare at the light emitting components.
To dispose the device, the local law should be followed.
Attentions
Keep the oximeter away from dust, vibration, corrosive substances, ex-
plosive materials, high temperature and moisture.
The device should be kept out of the reach of children.
If the oximeter gets wet, please stop operating it.
When it is carried from cold environment to warm and humid environ-
ment, please do not use it immediately.
DO NOT operate the button on front panel with sharp materials.
High temperature or high pressure steam disinfection to the oximeter
is not permitted. Refer to related chapter for instructions of cleaning
and disinfection.