30
Figure 7
Wrong Placement of the Probe:
Finger out Not deep enough
Figure 8
5. The oximeter will automatically start measurement in 2 seconds. Then the
default screen will be displayed (Figure 9A). User can read the values and
view the waveform from the display screen.
Figure 9A Default Screen Display
• “SpO2”: SpO2 label; “99”: SpO2 value;
• “PR”: Pulse rate label; “65”: Pulse rate value
• “ ”: Pulse beat icon;
• “ ”: Battery indicator;
• “ ”: Pulsation bar-graph;
• The displayed waveform is plethysmogram.
Key Operations::
• Short press “¢” key to switch display modes circularly, display screen will be
switched among the three measure screens displays as shown in Figure 9A,
Figure 9C and Figure 9D.
ENGLISH
To Next Page
Loading...
