32
• “12:30”: the current time.
• “REC: 00:02:22”: the time period up to now in hh:mm:ss format for the cur-
rent storing record since it was started. When nger is out, recording stops
and here displays the time period for the last stored record. The time period
will restart timing if a new piece of record is created once you insert nger into
the probe to start another measurement.
Key Operations:
• Long press “¢” key, menu screen will be displayed, refer to section 3.2 for
details;
6. Prompt information
• During measurement, if you haven’t inserted your nger into the probe or the
probe is off, “Finger out ” will be prompted on the screen.
• During measurement, if the probe is not connected to the oximeter, “No Sig-
nal!” will be prompted on the screen, as shown in Figure 10
.
Figure 10 “No Signal” Indication
• During measurement, if the memory is full or the total number of the records
reaches to 1024 pieces, the earliest record will be overwritten and the icon
“ ” will appear on the screen for prompt, as shown in Figure 11.
Figure 11 When Memory is Full
ENGLISH
To Next Page
Loading...
