D
Donna WilliamsSep 2, 2025
What to do if Gima Measuring Instruments cuff inflates before pressing the measurement button?
- CChad MorrisSep 2, 2025
Pull out the cuff to deflate. Stop using the device and contact us.
To Next PageTo Next PageWhat to do if Gima Measuring Instruments cuff inflates before pressing the measurement button?
Pull out the cuff to deflate. Stop using the device and contact us.
How to fix a loose cuff on Gima Measuring Instruments?
If you have a loose cuff with your Gima Measuring Instruments, it means that the cuff is not connected correctly. Correctly connect the cuff.
Why does the Gima Measuring Instruments cuff deflate quickly?
If the cuff deflates quickly on your Gima Measuring Instruments device, it's likely due to a loose cuff. Make sure to correctly apply the cuff.
Why does Gima Measuring Instruments power off suddenly when inflating?
If your Gima Measuring Instruments device powers off suddenly during inflation, it may be because the batteries have been depleted due to prolonged disuse or temperature changes. Replace all four batteries with new ones.
What does 'Excessive movement Over range Saturated signal' mean on Gima Measuring Instruments?
This message on your Gima Measuring Instruments indicates that the signal extent is too big because of movement during measurement. Keep your limbs and body still, and then measure again.
What causes overpressure in Gima Measuring Instruments?
Overpressure in Gima Measuring Instruments can occur if the cuff is blocked or squeezed. To resolve this, ensure the cuff is correctly connected.
What to do if there is no pressure in Gima Measuring Instruments?
If there is no pressure in your Gima Measuring Instruments device, it could be due to a cuff leakage, the cuff windpipe not being correctly connected, or the cuff not being inflated. You may need to buy a new cuff or correctly connect the cuff windpipe with the cuff. If the cuff is not inflated, stop using the device and contact us.
What to do if Gima Measuring Instruments won't start when holding the power button?
If your Gima Measuring Instruments device doesn't start when you hold the power button, it could be due to exhausted batteries or reversed battery polarities. Replace all four batteries with new ones and check the battery installation to ensure proper placement according to the polarities.
General| Model | CONTEC08A-VET |
|---|---|
| Category | Pet Care Product |
| Measurement Method | Oscillometric |
| Resolution (Blood Pressure) | 1 mmHg |
| Accuracy (Blood Pressure) | ±3 mmHg |
| Overpressure Protection | Yes |
| Product Type | Veterinary Blood Pressure Monitor |
| Accuracy (Temperature) | ±0.2°C |
| Resolution (Temperature) | 0.1°C |
| Memory Function | Yes |
| Auto Power Off | Yes |
| Waterproof | No |
| Applicable object | Dog, cat and other types of animals |
| Battery Type | AA |
| Probe Cover | Not applicable |
| Dimensions | 130mm x 110mm x 80mm |
| Weight | 300 g |
Steps for installing AA dry batteries, including polarity and battery cover closure.
Instructions for connecting and using the AC adapter with the device.
Details on technical alarms, such as low power, and how they are managed.
Guidelines for correct limb placement and measurement consistency for accurate results.
Steps to start, stop, and confirm a blood pressure measurement using the device.
How to access and view previously recorded blood pressure and pulse rate measurements.
Procedure for clearing all measurement results from the device's memory.
