Gima PC-80B - System Settings

27
N. ECG Measurement Result Descriptions Waveform
12 Waveform baseline wander
13 Suspected fast beat with baseline wander
14 Suspected slow beat with baseline wander
15 Suspected occasional short beat interval with
baseline wander
16 Suspected irregular beat interval with baseline
wander
17 Poor Signal, measure again
3.5 Data Management
3.5.1 Data Deletion
Select “Memory” on main menu screen, then press “
OK” button to enter
memory screen, as shown in Figure 3-18.
Note: the used space plus the unused space equals to the total memory size
(16MB/32MB).
“
Return”: press “ Return” button to return to main screen.
“
Delete”: press this key to delete all the records. Prior to deletion, a dialogue
box “Sure to delete all?” will be presented on the screen, as shown in Figure
3-19. If choose “YES” and press “
OK” button, all the records will be deleted,
as shown in Figure 3-20.
Note: The operation of data deletion carried out in the memory screen means all
the data in the device will be deleted; if you only want to delete one record, please
do that on waveform review screen.
3.5.2 Upload Data
Connect the device to PC with USB data cable, the device will automatically
enter the upload display as shown in Figure 3-21. The data can be dumped to
PC for data management, review and analysis.
Note: Ensure there is su󰀩cient battery power when deleting or uploading the
data since insu󰀩cient power may cause the interruption of operation.
3.6 System Setting
On the main menu screen, select “Setting”, then press “
OK” button to enter
system setting screen, as shown in Figure 3-22 and Figure 3-23
ENGLISH
Figure 3-18 Memory Screen
Figure 3-19
Figure 3-20 Records Deleting