D
Dustin ColeAug 13, 2025
Why Gima Measuring Instruments device can not be turned on?
- EElaine FosterAug 13, 2025
If your Gima Measuring Instruments device isn't turning on, the battery might be low or completely drained. Please charge the battery.
To Next PageTo Next PageWhy Gima Measuring Instruments device can not be turned on?
If your Gima Measuring Instruments device isn't turning on, the battery might be low or completely drained. Please charge the battery.
What to do if Gima Measuring Instruments device can not be used for full time after charge?
If your Gima Measuring Instruments device does not work for the expected time after charging, it may be that the battery was not fully charged. Please ensure the battery is fully charged.
Why is the display of nasal airflow unstable on Gima Measuring Instruments?
Unstable nasal airflow display on your Gima Measuring Instruments could be due to: 1. A connection problem. Ensure the device is correctly connected. 2. Incorrect wearing mode. Make sure the device is worn in the correct mode. 3. Patient movement. Keep the patient calm during the measurement.
What to do if Gima Measuring Instruments display disappears suddenly?
If the display on your Gima Measuring Instruments disappears suddenly, it might be entering an energy-saving mode, which is normal. Alternatively, the battery may be low, so try charging the battery.
Why PC can not identify SD card drive letter of Gima Measuring Instruments?
If your PC isn't recognizing the SD card drive letter for your Gima Measuring Instruments, it could be due to a poor connection with the USB interface. Try repeatedly connecting the USB data line.
Why my Gima RS01 Medical Equipment is not powering on?
If your Gima Medical Equipment isn't powering on, it could be due to a lack of battery capacity or a device failure. First, charge the battery immediately. If charging doesn't solve the issue, it may indicate a device failure.
What to do if SpO2 or Pulse rate is displayed abnormally on Gima RS01?
Abnormal SpO2 or pulse rate readings on your Gima Medical Equipment can occur if the finger is not correctly placed, the patient's SpO2 value is outside the measurement range, the finger isn't inserted deeply enough, or the finger is wobbling due to patient movement. Ensure the finger is correctly positioned. If you're sure the device is working correctly, seek a diagnosis from a hospital. Also, ensure the patient remains calm and still during measurement.
Why is the nose air flow waveform display instable on my Gima Medical Equipment?
An unstable nose airflow waveform display on your Gima Medical Equipment can be caused by connection issues, incorrect wearing of the device, or patient movement. Check the connection to ensure it is correctly connected. Make sure you are wearing the device correctly. The patient should remain calm and still during the measurement.
General| Brand | Gima |
|---|---|
| Model | RS01 |
| Category | Medical Equipment |
| Language | English |
