6 Maintain, Transport and Storage
6.1 Cleaning and disinfection
Do not immerse it into liquid.Use 75% alcohol to wipe the device enclosure, and use liquid soap
or isopropanol to wipe the watchband for disinfection, nature dry or clean it with clean and soft
cloth. Do not spray any liquid on the device directly, and avoid liquid penetrating into the device.
Attention:
% Please turn off the device before cleaning.
% Do not use strong solvent as acetone.
% Do not use abrasive materials as steel wire or silver polishing agent.
% The water used to clean the device should be below 60 ℃.
% Do not allow any liquid to enter the device, and do not immerse any part of the device into
any liquid.
% Do not leave any cleaning solution on the surface of the device.
6.2 Maintenance
A.Check the main unit and all accessories periodically to make sure that there is no visible
damage that may affect patient’s safety and monitoring performance. It is recommended that the
device should be inspected weekly at least. When there is obvious damage, stop using it.
B. Please clean and disinfect the device before/after using it according to the User Manual (6.1).
To Next Page
Loading...
